New broadhead from ArrowDynamic Solutions - Page 5 -

Heirloom · 07-18-2010, 09:39 PM

When your ready Matt, just hollar, I can send you a trade....

mudslinger · 07-25-2010, 02:08 PM

Are the new Radians ready for shipment yet?????? If so, where can I get my hands on some?

Arrowds · 07-25-2010, 06:41 PM

Well...sometimes...things just don't go as smooth as planned. The packaging has not arrived yet....lovely. And the slightly re-engineered linear spring component drawings have been in the hands of my supplier to produce the part so we can confirm it resolves the problem completely we experienced when we went to the full production run. But...no samples have arrived yet...

No worries ya'll....just like bowhunting...the good stuff always shows up after a long, uncomfortable sit in the woods! I'm well past the uncomfortable wait time frame personally....so I gotta be getting close to getting this four plus year effort done already so you can start slinging them at critters too!

Thank you for your continued patience and understanding...progress however slow it may seem...is still progress!

top dog rick · 07-25-2010, 07:38 PM

Any Plans to make it 2" cut ?

Or how about a 1 1/2 cut 4 blade ???

Great design can't wait to shoot some !

mudslinger · 07-25-2010, 09:02 PM

Thanks for the update. Nice to see a mfg come on these sites and tell us what is happening instead of this and that you get from most. Patience is a virtue. Would rather have a good product than one that is iffy just to get it out earlier. Just let us know when and where we can order and I will be ordering some.

licking county assassin · 07-25-2010, 09:18 PM

Quote:

Originally Posted by mudslinger

Thanks for the update. Nice to see a mfg come on these sites and tell us what is happening instead of this and that you get from most. Patience is a virtue. Would rather have a good product than one that is iffy just to get it out earlier. Just let us know when and where we can order and I will be ordering some.

Yep, this head is high on my list... hope to get my hands on one.. if i do it will be awesome i am sure.

Arrowds · 07-26-2010, 11:00 AM

Thanks for the patience guys.....it's apreciated for sure.

With respect to support of wider cut options....easily done and already factored into the design should the demand allow cost justification for a particular width and the demand of the masses forces me to do it. However, as usual it seems....I'll buck the popular notion that wider is better. My study just doesn't support the overall bowhunting/lethal outcome being better by adding .5 of an inch of cutting width on a two blade design. And that is best for another discussion as it'll surely rub the fir the wrong way on many die hard folks whom are shooting a very popular two blade with that specific cutting width. Before a snap reaction to such a statement is made....I'd ask you to ask yourself this question first...With respect to that very popular broadhead/company......why did they come out with a "Low KE" version which just happens to sport a 1.5 inch cut after a year or two in the market with a 2" cut? If that wider cut is so much better...why REDUCE the cutting width? The answers are out there...you just need to get past the marketing stuff and see it for what it really is.

With respect to the support of multiple blade combinations which sport compressible cutting width technology....of course this engineering effort is easily accomplished and already in progress. Just not ready to run before we begin walking.

top dog rick · 07-26-2010, 05:45 PM

Quote:

Originally Posted by Arrowds

Thanks for the patience guys.....it's apreciated for sure.

With respect to support of wider cut options....easily done and already factored into the design should the demand allow cost justification for a particular width and the demand of the masses forces me to do it. However, as usual it seems....I'll buck the popular notion that wider is better. My study just doesn't support the overall bowhunting/lethal outcome being better by adding .5 of an inch of cutting width on a two blade design. And that is best for another discussion as it'll surely rub the fir the wrong way on many die hard folks whom are shooting a very popular two blade with that specific cutting width. Before a snap reaction to such a statement is made....I'd ask you to ask yourself this question first...With respect to that very popular broadhead/company......why did they come out with a "Low KE" version which just happens to sport a 1.5 inch cut after a year or two in the market with a 2" cut? If that wider cut is so much better...why REDUCE the cutting width? The answers are out there...you just need to get past the marketing stuff and see it for what it really is.

With respect to the support of multiple blade combinations which sport compressible cutting width technology....of course this engineering effort is easily accomplished and already in progress. Just not ready to run before we begin walking.

Thanks for the response , I happen to be one of the shooters here that shoots TONS of K.E. 77 lb x force 30.5 inch draw , and like to get as much cutting width as possible .

Still will give these a shot , and I can see a deer or hog Waiting to CATCH one of these heads !

Arrowds · 08-14-2010, 11:31 AM

Okay...much anticipated by those whom are actually on the jet now...the six bowhunters are in the air on thier way to South Africa...bow cases full of Radians to put thru any critters that happen to walk within range...I'll post the photo's as they send them to me to keep you updated on thier hunt results. Video won't be put together until they get back...plus...Wyoming antelope are in trouble this Sunday as well....I've got some traditional shooters going to put the Radian off thier longbows thru some of these speedy critters....I'll be posting those results as well. Going to be a good year for bowhunters...and not so good for what critters they let go of the string on!

mudslinger · 08-14-2010, 04:03 PM

Please,I need to buy some, When and Where can I do this?

cartman308 · 08-15-2010, 02:42 AM

Quote:

Originally Posted by Arrowds

Okay...much anticipated by those whom are actually on the jet now...the six bowhunters are in the air on thier way to South Africa...bow cases full of Radians to put thru any critters that happen to walk within range...I'll post the photo's as they send them to me to keep you updated on thier hunt results. Video won't be put together until they get back...plus...Wyoming antelope are in trouble this Sunday as well....I've got some traditional shooters going to put the Radian off thier longbows thru some of these speedy critters....I'll be posting those results as well. Going to be a good year for bowhunters...and not so good for what critters they let go of the string on!

Lucky fellas!!!!! Wish I was going. I want to stick me some warthog!!!!

Arrowds · 08-21-2010, 03:08 PM

Just a bit of a tease in showing what a 40 lb pull, pink Athens bow shooting our custom arrows topped with a Radian broadhead can do.
Also...I think this is a blesbok...anyway...it's beautiful critter and the Radian put it down quick as well. Eland, Kudu, Wildebeast, warthog and many others were shot with the Radian...I'll have all the high res photo's, video and forensic photo's to share upon thier return from Namibia next week of all the critters thumped.
These were sent via cell phone so apologize for their lack of clarity/size.

cartman308 · 08-21-2010, 04:18 PM

Quote:

Originally Posted by Arrowds

Just a bit of a tease in showing what a 40 lb pull, pink Athens bow shooting our custom arrows topped with a Radian broadhead can do.
Also...I think this is a blesbok...anyway...it's beautiful critter and the Radian put it down quick as well. Eland, Kudu, Wildebeast, warthog and many others were shot with the Radian...I'll have all the high res photo's, video and forensic photo's to share upon thier return from Namibia next week of all the critters thumped.
These were sent via cell phone so apologize for their lack of clarity/size.

Absolutly awesome! Can't wait for the other pics. Congrats on another wicked head!

licking county assassin · 08-23-2010, 09:38 PM

I can't wait to put one of these through an ohio whitetail

mudslinger · 08-24-2010, 08:14 AM

Glad to see the success of the new Radian and all the hunters in Africa. If by some chance you get any in a 100 grain heads for sale before Sept 17th, please let me know. I would love to take some to Africa with me. Congrats on what looks like a very go head.

07-25-2010, 02:08 PM	#62 (permalink)
mudslinger 125gr Join Date: Jan 2010 Location: Texas Posts: 303	Are the new Radians ready for shipment yet?????? If so, where can I get my hands on some? __________________ 09 HCA Speed Pro 29" 70# Gold Tip XT Hunter 28" @560 grains Smoke Ramcats!

07-25-2010, 09:02 PM	#65 (permalink)
mudslinger 125gr Join Date: Jan 2010 Location: Texas Posts: 303	Thanks for the update. Nice to see a mfg come on these sites and tell us what is happening instead of this and that you get from most. Patience is a virtue. Would rather have a good product than one that is iffy just to get it out earlier. Just let us know when and where we can order and I will be ordering some. __________________ 09 HCA Speed Pro 29" 70# Gold Tip XT Hunter 28" @560 grains Smoke Ramcats!

08-14-2010, 04:03 PM	#70 (permalink)
mudslinger 125gr Join Date: Jan 2010 Location: Texas Posts: 303	Please,I need to buy some, When and Where can I do this? __________________ 09 HCA Speed Pro 29" 70# Gold Tip XT Hunter 28" @560 grains Smoke Ramcats!

08-23-2010, 09:38 PM	#74 (permalink)
licking county assassin 100gr Join Date: Nov 2009 Posts: 152	I can't wait to put one of these through an ohio whitetail __________________ ATHENS FACTORY STAFF SHOOTER...ENGINEERED TO KILLPROSTRING STAFF..QUALITY STRINGS AT REASONABLE PRICES

08-24-2010, 08:14 AM	#75 (permalink)
mudslinger 125gr Join Date: Jan 2010 Location: Texas Posts: 303	Glad to see the success of the new Radian and all the hunters in Africa. If by some chance you get any in a 100 grain heads for sale before Sept 17th, please let me know. I would love to take some to Africa with me. Congrats on what looks like a very go head. __________________ 09 HCA Speed Pro 29" 70# Gold Tip XT Hunter 28" @560 grains Smoke Ramcats!

07-18-2010, 09:39 PM	#61 (permalink)
Heirloom Trial Member Join Date: Jul 2010 Posts: 8	When your ready Matt, just hollar, I can send you a trade....

07-25-2010, 06:41 PM	#63 (permalink)
Arrowds Broadhead Maker Join Date: Jan 2010 Posts: 173	Well...sometimes...things just don't go as smooth as planned. The packaging has not arrived yet....lovely. And the slightly re-engineered linear spring component drawings have been in the hands of my supplier to produce the part so we can confirm it resolves the problem completely we experienced when we went to the full production run. But...no samples have arrived yet... No worries ya'll....just like bowhunting...the good stuff always shows up after a long, uncomfortable sit in the woods! I'm well past the uncomfortable wait time frame personally....so I gotta be getting close to getting this four plus year effort done already so you can start slinging them at critters too! Thank you for your continued patience and understanding...progress however slow it may seem...is still progress!

07-25-2010, 07:38 PM	#64 (permalink)
top dog rick 100gr Join Date: Feb 2010 Location: Alabama Posts: 233	Any Plans to make it 2" cut ? Or how about a 1 1/2 cut 4 blade ??? Great design can't wait to shoot some !

07-26-2010, 11:00 AM	#67 (permalink)
Arrowds Broadhead Maker Join Date: Jan 2010 Posts: 173	Thanks for the patience guys.....it's apreciated for sure. With respect to support of wider cut options....easily done and already factored into the design should the demand allow cost justification for a particular width and the demand of the masses forces me to do it. However, as usual it seems....I'll buck the popular notion that wider is better. My study just doesn't support the overall bowhunting/lethal outcome being better by adding .5 of an inch of cutting width on a two blade design. And that is best for another discussion as it'll surely rub the fir the wrong way on many die hard folks whom are shooting a very popular two blade with that specific cutting width. Before a snap reaction to such a statement is made....I'd ask you to ask yourself this question first...With respect to that very popular broadhead/company......why did they come out with a "Low KE" version which just happens to sport a 1.5 inch cut after a year or two in the market with a 2" cut? If that wider cut is so much better...why REDUCE the cutting width? The answers are out there...you just need to get past the marketing stuff and see it for what it really is. With respect to the support of multiple blade combinations which sport compressible cutting width technology....of course this engineering effort is easily accomplished and already in progress. Just not ready to run before we begin walking.

08-14-2010, 11:31 AM	#69 (permalink)
Arrowds Broadhead Maker Join Date: Jan 2010 Posts: 173	Okay...much anticipated by those whom are actually on the jet now...the six bowhunters are in the air on thier way to South Africa...bow cases full of Radians to put thru any critters that happen to walk within range...I'll post the photo's as they send them to me to keep you updated on thier hunt results. Video won't be put together until they get back...plus...Wyoming antelope are in trouble this Sunday as well....I've got some traditional shooters going to put the Radian off thier longbows thru some of these speedy critters....I'll be posting those results as well. Going to be a good year for bowhunters...and not so good for what critters they let go of the string on!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode