New broadhead from ArrowDynamic Solutions -

cartman308 · 01-06-2010, 02:45 PM

Hope you don't mind me linking to ArcheryTalk. The ArrowDS site doesn't have them yet.....

These guys make the Atom and Guillotine heads. I've read and talked to the owner a few times about the Atom heads. One things for sure, he whole heartedly believes in his products and knows the science behind them. Whether the real world follows the science........that's another thread......

His new head is called the Radian. It LOOKS alot like the Reign but the blades don't pivot, rather they compress like leaf springs..... Interesting design. I may be game.

Arrowdynamic Solutions New Radian Broadheads - ArcheryTalk Forum: Target & Bowhunting Chat

saddleman · 01-06-2010, 03:30 PM

that looks vary interesting.

Andy · 01-06-2010, 03:49 PM

Quote:

Originally Posted by cartman308

I've read and talked to the owner a few times about the Atom heads. One things for sure, he whole heartedly believes in his products and knows the science behind them. Whether the real world follows the science........that's another thread......]

Do you know him well enough to invite him to join the forum? We'd love to have another broadhead company owner as a member and contributor.

WABOWMAN · 01-06-2010, 04:03 PM

Very interesting!

cartman308 · 01-06-2010, 06:49 PM

Quote:

Originally Posted by Andy

Do you know him well enough to invite him to join the forum? We'd love to have another broadhead company owner as a member and contributor.

I'll send him a PM

Andy · 01-06-2010, 07:16 PM

Thanks! I think Booner had a phone conversation with him this evening.

cartman308 · 01-06-2010, 08:00 PM

Quote:

Originally Posted by Andy

Thanks! I think Booner had a phone conversation with him this evening.

Good deal. He definatly does a good job explaining the how and why his products work. Hopefully he signs up!

Gerhard · 01-06-2010, 09:03 PM

Question,

How can he claim this is a cut on contact broad head?

Or am I reading the description wrong?

Not fixed bladed, not mechanical. It cuts on contact, spanning 1.5 inches via to independantly compressible .039 inch thick super strong and super sharp blades. Goes thru or past bone via minimizing deflection, compressed blade cutting width capability significantly enhancing achievement of compelete penetration.

Booner · 01-06-2010, 09:15 PM

Quote:

Originally Posted by Gerhard

How can he claim this is a cut on contact broad head?

Gerhard.....I don' think he is describing the head as a cut on contact I think him saying it "cut's" on contact is his way of saying there is enough room in between the blades and the trocar tip to allow the head to penetrate the flesh before the blades come into play, reducing the chance for deflection. I think it's just a word confusion. I may be totally wrong but...it is not my idea of a COC head...unless that trocar is sharpened.....hmm

cartman308 · 01-06-2010, 11:49 PM

Definatly not a COC head. At least not what is typically consoderer COC.

Arrowds · 01-07-2010, 10:57 AM

Just signed up and thanks for having me.

With respect to "Cut on Contact"...Please have a close up look at the tip on the Radian photo attached....click it to open it to a larger image. This one is titanium tipped, 100 grain. Notice the angle created by the flutes, thier radius and overlapping each other provide a tip accuracy of one ten thousandths of an inch accurate with four very sharp cutting edges radiating away from the tip. Providing an immediate "Cut on Contact" exactly the same as a more traditional cut to the tip two bladed design. I attempted to match as closely as possible that magnitude of KE required of a more traditional two bladed/cut to the tip design for penetration of animal substance densities.

Andy · 01-07-2010, 11:48 AM

I'm liking what I see here.

yoda4x4 · 01-07-2010, 11:53 AM

Interesting design. I think this definitely qualifies as a BH for some of the testing that goes on here. BTW, welcome aboard.

Just a suggestion as I think it would go a long way, put a post up in the Welcome to Broadheadtalk forum with a brief description of you. Again, welcome to the group.

David

BuckFeverLodge · 01-07-2010, 02:18 PM

Quote:

Originally Posted by Arrowds

Just signed up and thanks for having me.

With respect to "Cut on Contact"...I think the one gentleman "Booner" has it exactly correct... Please have a close up look at the tip on the Radian photo attached....click it to open it to a larger image. This one is titanium tipped, 100 grain. Notice the angle created by the flutes, thier radius and overlapping each other provide a tip accuracy of one ten thousandths of an inch accurate with four very sharp cutting edges radiating away from the tip. Providing a "Cut on Contact". I attempted to match as closely as possible that magnitude of KE required of a more traditional two bladed/cut to the tip design for penetration of animal substance densities.

Excellent looking BH. When will these be available for some wreckage? Thanks again for joining the site.

cartman308 · 01-07-2010, 02:26 PM

Yes, when will they be available? I'm hoping to get in on a hog hunt and would like to add this one to the test batch

. Thanks for signing up arrowds!

01-06-2010, 02:45 PM	#1 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 804	New broadhead from ArrowDynamic Solutions Hope you don't mind me linking to ArcheryTalk. The ArrowDS site doesn't have them yet..... These guys make the Atom and Guillotine heads. I've read and talked to the owner a few times about the Atom heads. One things for sure, he whole heartedly believes in his products and knows the science behind them. Whether the real world follows the science........that's another thread...... His new head is called the Radian. It LOOKS alot like the Reign but the blades don't pivot, rather they compress like leaf springs..... Interesting design. I may be game. Arrowdynamic Solutions New Radian Broadheads - ArcheryTalk Forum: Target & Bowhunting Chat __________________ Broadheadtalk Moderator Athens Factory Staff Shooter - Carbon Creations Field Staff - Wicked1 Strings Prostaff

01-06-2010, 03:30 PM	#2 (permalink)
saddleman 100gr Join Date: Nov 2009 Location: vermontville, MI Posts: 125	that looks vary interesting. __________________ ATHENS Field staff Broadheadshed.com Staff Member Buck Addits Staff J & B Saddlery ~ Owner

01-06-2010, 04:03 PM	#4 (permalink)
WABOWMAN 130gr Join Date: Dec 2009 Location: port townsend,WA Posts: 494	Very interesting! __________________ Athens Field staff TRU-ball staff Vapor trail pro staff Broadheadshed staff Owner MAY'S CUSTOM ARCHERY ATHENS APROVED DEALER

01-06-2010, 07:16 PM	#6 (permalink)
Andy Administrator Join Date: Nov 2009 Location: Arkansas USA Posts: 169	Thanks! I think Booner had a phone conversation with him this evening. __________________

01-06-2010, 09:03 PM	#8 (permalink)
Gerhard 145gr Join Date: Dec 2009 Location: On Migration (South Africa) Posts: 608	Question, How can he claim this is a cut on contact broad head? Or am I reading the description wrong? Not fixed bladed, not mechanical. It cuts on contact, spanning 1.5 inches via to independantly compressible .039 inch thick super strong and super sharp blades. Goes thru or past bone via minimizing deflection, compressed blade cutting width capability significantly enhancing achievement of compelete penetration. __________________ Bowtech Pro Staff, Slick Trick Pro Staff, Broadheadtalk.com Field Staff Last edited by Gerhard; 01-06-2010 at 09:06 PM.

01-06-2010, 11:49 PM	#10 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 804	Definatly not a COC head. At least not what is typically consoderer COC. __________________ Broadheadtalk Moderator Athens Factory Staff Shooter - Carbon Creations Field Staff - Wicked1 Strings Prostaff

01-07-2010, 11:48 AM	#12 (permalink)
Andy Administrator Join Date: Nov 2009 Location: Arkansas USA Posts: 169	I'm liking what I see here. __________________

01-07-2010, 11:53 AM	#13 (permalink)
yoda4x4 130gr Join Date: Dec 2009 Location: Edison, NJ Posts: 475	Interesting design. I think this definitely qualifies as a BH for some of the testing that goes on here. BTW, welcome aboard. Just a suggestion as I think it would go a long way, put a post up in the Welcome to Broadheadtalk forum with a brief description of you. Again, welcome to the group. David

01-07-2010, 02:26 PM	#15 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 804	Yes, when will they be available? I'm hoping to get in on a hog hunt and would like to add this one to the test batch . Thanks for signing up arrowds! __________________ Broadheadtalk Moderator Athens Factory Staff Shooter - Carbon Creations Field Staff - Wicked1 Strings Prostaff

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode