Hunor broadheads -

yotekilla · 10-02-2011, 07:14 PM

Has anyone seen the youtube vid of the 2 Hunor broadheads sticking into a piece of 3/4" steel?? I find this hard to believe. Forst shot was a slick trick and it bounced off.

Terrier · 10-02-2011, 10:22 PM

This is a picture about it.

Dr.FrankB-Mimic · 10-03-2011, 12:42 AM

It is not at all hard to believe.
The huge difference is ATS 34 alloy, that make the HUNORS unbreakable. A month ago I shot a mature buffalo nearly broadside from 20 meters for testing purposes, with 125 grs Hunor AFRICA; full rib hit on entrance, full rib hit on exit, total arrow weight 525 grs at 286 fps, FMJ 300 shaft. The arrow exited about 12 cm., and the BH was practically new (and sharp...!).

yotekilla · 10-03-2011, 03:13 AM

Interesting. How well do they fly out of a speed bow, say 310fps and faster??

Dr.FrankB-Mimic · 10-05-2011, 12:40 AM

From my fastest bow, at 303 fps, the Africa model flies perfectly, and no corrections are needed on pins, for hunting purposes, up to 60 meters, shifting them with target points.
The NEOS, instead, on my bows have a noticeably different point of impact if compared to Africas or target points, and you definitely need to reset your pins. With them, I am around 20 cm. higher and 15 on the left at 40 meters. The grouping anyhow is very good.

bigcut · 10-09-2011, 10:33 AM

Quote:

Originally Posted by Dr.FrankB-Mimic

The NEOS, instead, on my bows have a noticeably different point of impact if compared to Africas or target points, and you definitely need to reset your pins. With them, I am around 20 cm. higher and 15 on the left at 40 meters. The grouping anyhow is very good.

That's rather strange, and I wonder why? because that is a huge discrepancy between the two heads' point of impact given the fact that both heads are two bladed, and I assume were the same weight.
I can shoot 2 bladed heads by different manufacturers all day, and they all have the same point of impact (give, or take 2") provided everything else being equal (like weight)

Wood · 10-09-2011, 11:21 PM

Quote:

Originally Posted by bigcut

That's rather strange, and I wonder why? because that is a huge discrepancy between the two heads' point of impact given the fact that both heads are two bladed, and I assume were the same weight.
I can shoot 2 bladed heads by different manufacturers all day, and they all have the same point of impact (give, or take 2") provided everything else being equal (like weight)

Those big wings on the Neo have got to make a difference.

Norwegian Woods · 10-18-2011, 05:27 AM

Quote:

Originally Posted by yotekilla

Has anyone seen the youtube vid of the 2 Hunor broadheads sticking into a piece of 3/4" steel?? I find this hard to believe. Forst shot was a slick trick and it bounced off.

What I find interesting is that the shaft gets totally destroyed when shooting the Slick Trick but the shafts stays together with the Hunor heads

Terrier · 12-22-2011, 10:53 AM

Ready.......

Bryan · 12-22-2011, 05:47 PM

Now that 4 blade head has got my attention!! any specs on width and weight!! That head looks awesome.

Terrier · 12-22-2011, 08:42 PM

Quote:

Originally Posted by Bryan

Now that 4 blade head has got my attention!! any specs on width and weight!! That head looks awesome.

Cutting diameter: 1.26"/1"
Blade thickness: .059"
Blade material: ATS34
Weight: 100 and 125 grain with aluminium ferrule (AISI 7075-T6) 200 with heat treated steel ferrule (12L14)

Bryan · 12-23-2011, 03:06 PM

I ordered a three pack of the 125 grain heads to see how they fly. will play around with them. They sure look sweet!!

Bryan · 01-12-2012, 04:57 PM

Wow 1/12/12 they finally arrived in the mail! Cant even read where they came from. I guess Germany but could be wrong. Have three of the 125 grain 4 blade heads to play around with. They are cool looking though!!!!

olivier ch · 01-13-2012, 12:43 AM

Quote:

Originally Posted by Bryan

Wow 1/12/12 they finally arrived in the mail! Cant even read where they came from. I guess Germany but could be wrong. Have three of the 125 grain 4 blade heads to play around with. They are cool looking though!!!!

and what do you think about this model compare over brand ?

Fabbri · 01-13-2012, 01:34 AM

let we know all about those broadheads please!!!!
and also something about edge retention on target please....

10-02-2011, 07:14 PM	#1 (permalink)
yotekilla 100gr Join Date: Oct 2010 Location: Northern IN Posts: 230	Hunor broadheads Has anyone seen the youtube vid of the 2 Hunor broadheads sticking into a piece of 3/4" steel?? I find this hard to believe. Forst shot was a slick trick and it bounced off. __________________ PSE EVO 65lb. 29" draw Golt tip pro hunters 100gr slick tricks 380gr arrow 300fps.

10-03-2011, 12:42 AM	#3 (permalink)
Dr.FrankB-Mimic 85gr Join Date: Jul 2010 Location: Northern Italy Posts: 96	It is not at all hard to believe. The huge difference is ATS 34 alloy, that make the HUNORS unbreakable. A month ago I shot a mature buffalo nearly broadside from 20 meters for testing purposes, with 125 grs Hunor AFRICA; full rib hit on entrance, full rib hit on exit, total arrow weight 525 grs at 286 fps, FMJ 300 shaft. The arrow exited about 12 cm., and the BH was practically new (and sharp...!). __________________ Kill to hunt; don't hunt to kill.

10-03-2011, 03:13 AM	#4 (permalink)
yotekilla 100gr Join Date: Oct 2010 Location: Northern IN Posts: 230	Interesting. How well do they fly out of a speed bow, say 310fps and faster?? __________________ PSE EVO 65lb. 29" draw Golt tip pro hunters 100gr slick tricks 380gr arrow 300fps.

10-05-2011, 12:40 AM	#5 (permalink)
Dr.FrankB-Mimic 85gr Join Date: Jul 2010 Location: Northern Italy Posts: 96	From my fastest bow, at 303 fps, the Africa model flies perfectly, and no corrections are needed on pins, for hunting purposes, up to 60 meters, shifting them with target points. The NEOS, instead, on my bows have a noticeably different point of impact if compared to Africas or target points, and you definitely need to reset your pins. With them, I am around 20 cm. higher and 15 on the left at 40 meters. The grouping anyhow is very good. __________________ Kill to hunt; don't hunt to kill.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-02-2011, 10:22 PM	#2 (permalink)
Terrier 75gr Join Date: Jan 2011 Posts: 20	This is a picture about it.

12-22-2011, 10:53 AM	#9 (permalink)
Terrier 75gr Join Date: Jan 2011 Posts: 20	Ready.......

12-22-2011, 05:47 PM	#10 (permalink)
Bryan Trial Member Join Date: Feb 2011 Posts: 3	Now that 4 blade head has got my attention!! any specs on width and weight!! That head looks awesome.

12-23-2011, 03:06 PM	#12 (permalink)
Bryan Trial Member Join Date: Feb 2011 Posts: 3	I ordered a three pack of the 125 grain heads to see how they fly. will play around with them. They sure look sweet!!

01-12-2012, 04:57 PM	#13 (permalink)
Bryan Trial Member Join Date: Feb 2011 Posts: 3	Wow 1/12/12 they finally arrived in the mail! Cant even read where they came from. I guess Germany but could be wrong. Have three of the 125 grain 4 blade heads to play around with. They are cool looking though!!!!

01-13-2012, 01:34 AM	#15 (permalink)
Fabbri 125gr Join Date: Oct 2010 Location: Latina, Italy Posts: 319	let we know all about those broadheads please!!!! and also something about edge retention on target please....