homemade torture tested -

quick94stang · 02-26-2011, 09:53 PM

all 4 broadheads started as circ saw blades and old bh ferrules. i took a three blade ferulle and put it in my drill press then started shaving with a file till it was small enuff.. then cut out the blade to desired size.then i cut a slit in the ferulle big enuff for the blade and i jbweld it in ..then sharpen and paint..it takes me about 2-3 hours per head so a little time consuming..the blackone in the pic is 200 gr and 1 1/2 in cut.the red ones ar both about 125 gr and 1 3/8 and the silver one is for turkeys and its 125 and 1 1/4.
the plywood is 3/4 and the blade was still sharp imagine what it would do to a deer! i cant wait to see! thanks alot for looking..

cartman308 · 02-27-2011, 05:38 AM

Very cool!!!!!!!

quick94stang · 02-27-2011, 08:37 AM

ty!

raghorn · 02-27-2011, 07:04 PM

quick94stang;
Great looking heads!
Be sure to check your state laws as to the legality of your barbed heads.

Fabbri · 02-28-2011, 02:54 AM

wooooow great!!!!
it could be interesting to see some pictured about how u realized the broadheads....
thank u a lot for sharing!!!!!

quick94stang · 03-02-2011, 05:50 PM

well i realized that i needed to make my own bh when i was going to buy new ones and crapped my pants at how expensive they are!

Garkane · 03-03-2011, 11:04 AM

Roger that Quick, working in a die shop most of my life it was easy to see how easy it would be to make some when i saw a few other home made's.

Ed

05_sprcrw · 03-03-2011, 03:30 PM

Look great!

Ben Belt · 04-01-2011, 06:09 AM

Good job!

Booner · 04-03-2011, 08:36 PM

Awesome!! Fun isn't it?

Chrisrokz05 · 04-15-2011, 07:52 PM

Very nice! The only thing I would be concerned about with the red broadhead would be wind planing. Also, do they make 200 grain practice tips? I'm sure you could come up with something to practice with the same weight though

keep up the good work man!

02-26-2011, 09:53 PM	#1 (permalink)
quick94stang 85gr Join Date: Jan 2011 Location: St. Charles, MO Posts: 31	homemade torture tested all 4 broadheads started as circ saw blades and old bh ferrules. i took a three blade ferulle and put it in my drill press then started shaving with a file till it was small enuff.. then cut out the blade to desired size.then i cut a slit in the ferulle big enuff for the blade and i jbweld it in ..then sharpen and paint..it takes me about 2-3 hours per head so a little time consuming..the blackone in the pic is 200 gr and 1 1/2 in cut.the red ones ar both about 125 gr and 1 3/8 and the silver one is for turkeys and its 125 and 1 1/4. the plywood is 3/4 and the blade was still sharp imagine what it would do to a deer! i cant wait to see! thanks alot for looking..

02-27-2011, 05:38 AM	#2 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 1,226	Very cool!!!!!!! __________________ Broadheadtalk Moderator Athens Factory Staff Shooter

02-27-2011, 07:04 PM	#4 (permalink)
raghorn 100gr Join Date: Jan 2010 Location: Colorado Posts: 279	quick94stang; Great looking heads! Be sure to check your state laws as to the legality of your barbed heads. __________________ Colorado Bowhunters Assc >>>-----> American Broadhead Collectors Club Colorado Traditional Archers Society >>>-----> Ron Brunges

03-03-2011, 11:04 AM	#7 (permalink)
Garkane 85gr Join Date: Feb 2011 Location: Chicago area Posts: 30	Roger that Quick, working in a die shop most of my life it was easy to see how easy it would be to make some when i saw a few other home made's. Ed __________________ A government big enough to give you everything you want, is strong enough to take everything you have. Thomas Jefferson

03-03-2011, 03:30 PM	#8 (permalink)
05_sprcrw Broadhead Tester Join Date: Mar 2010 Location: Lincoln, NE Posts: 1,445	Look great! __________________ New Breed Archery Samurai Genetix 82lbs 29" 550 Grains 16% F.O.C. 282 fps, RFA Phoenix and Razorhawk Broadheads

02-27-2011, 08:37 AM	#3 (permalink)
quick94stang 85gr Join Date: Jan 2011 Location: St. Charles, MO Posts: 31	ty!

02-28-2011, 02:54 AM	#5 (permalink)
Fabbri 125gr Join Date: Oct 2010 Location: Latina, Italy Posts: 319	wooooow great!!!! it could be interesting to see some pictured about how u realized the broadheads.... thank u a lot for sharing!!!!!

03-02-2011, 05:50 PM	#6 (permalink)
quick94stang 85gr Join Date: Jan 2011 Location: St. Charles, MO Posts: 31	well i realized that i needed to make my own bh when i was going to buy new ones and crapped my pants at how expensive they are!

04-01-2011, 06:09 AM	#9 (permalink)
Ben Belt Trial Member Join Date: Oct 2010 Location: Neterlands Posts: 19	Good job!

04-03-2011, 08:36 PM	#10 (permalink)
Booner Administrator Join Date: Nov 2009 Location: Arkansas USA Posts: 957	Awesome!! Fun isn't it?

04-15-2011, 07:52 PM	#11 (permalink)
Chrisrokz05 Trial Member Join Date: Apr 2011 Location: Beloit, Wisconsin Posts: 12	Very nice! The only thing I would be concerned about with the red broadhead would be wind planing. Also, do they make 200 grain practice tips? I'm sure you could come up with something to practice with the same weight though keep up the good work man!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode