Low draw weight mech -

prestoncohunter · 08-20-2010, 02:08 PM

Ok here's my setup. 04 Bowtech MityMight, 29.5 inch draw, shooting GoldTip carbons, using 100 grain tips, at 50 pounds. Just recently had to drop the draw weight due to some shoulder issues. I was shooting 59# and was getting 270 fps out of this setup, not sure what my current speed is as I haven't had a chance to chrono it.

Have shot Muzzy 3 blade 100 grain for years with great success but for the last couple years have been thinking about going to a mech for something a bit different. Very well may stick with my Muzzy's but would like opinions on a mech that I can be confident on performing out of my current setup.

Have seen first hand how well NAP Spitfires do from my fathers crossbow.

prestoncohunter · 08-20-2010, 02:15 PM

I guess I should also add, these will be used mostly for whitetails but we do have several black bear around and if one comes by I plan on taking it as well.

I also hunt about 25% of the time from a popup blind and would prefer to keep the shoot thru screens in place.

yoda4x4 · 08-20-2010, 02:41 PM

While you have a long DL, with your draw weight being fairly low, I'd steer away from the Spitfires as they seem to require more energy to open their blades up due to the locking mechanism. If you are stuck on going with a mechanical, I'd suggest using a Rocket Steelhead.

But with this said, I'd go with a fixed blade. You can stay with your Muzzy's as they are an excellent BH or go with a COC type BH (I use Buzzcuts 125gr, 2 bladed).

David

cartman308 · 08-20-2010, 02:48 PM

HEY PCH!!!!!! glad to see you made it!!!!

The guys here will help line you out. As far as a blind with screens. I wouldn't use any mechanical with them. G5 i believe advertises the new T3 can be shot through mesh, but I don't know if I would.

Pureluck · 08-20-2010, 05:42 PM

I have noticed that Swhackers penetrate fairly close to my Hellrazors at 40 yards. The Grim Reaper 1 3/8 inch cut would be the most extreme I would say with your setup. Idealy I would stick with a fixed blade as well.

PL

richa3md · 08-20-2010, 10:32 PM

Even rage has a 40 KE version but I personally in good conscience would shoot at a deer with a mech if not properly equipped just my 2cents

08-20-2010, 02:08 PM	#1 (permalink)
prestoncohunter Trial Member Join Date: Aug 2010 Location: West Virginia Posts: 4	Low draw weight mech Ok here's my setup. 04 Bowtech MityMight, 29.5 inch draw, shooting GoldTip carbons, using 100 grain tips, at 50 pounds. Just recently had to drop the draw weight due to some shoulder issues. I was shooting 59# and was getting 270 fps out of this setup, not sure what my current speed is as I haven't had a chance to chrono it. Have shot Muzzy 3 blade 100 grain for years with great success but for the last couple years have been thinking about going to a mech for something a bit different. Very well may stick with my Muzzy's but would like opinions on a mech that I can be confident on performing out of my current setup. Have seen first hand how well NAP Spitfires do from my fathers crossbow.

08-20-2010, 02:41 PM	#3 (permalink)
yoda4x4 130gr Join Date: Dec 2009 Location: Edison, NJ Posts: 598	While you have a long DL, with your draw weight being fairly low, I'd steer away from the Spitfires as they seem to require more energy to open their blades up due to the locking mechanism. If you are stuck on going with a mechanical, I'd suggest using a Rocket Steelhead. But with this said, I'd go with a fixed blade. You can stay with your Muzzy's as they are an excellent BH or go with a COC type BH (I use Buzzcuts 125gr, 2 bladed). David __________________ Trophy Blend Scents Pro Staff

08-20-2010, 02:48 PM	#4 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 1,201	HEY PCH!!!!!! glad to see you made it!!!! The guys here will help line you out. As far as a blind with screens. I wouldn't use any mechanical with them. G5 i believe advertises the new T3 can be shot through mesh, but I don't know if I would. __________________ Broadheadtalk Moderator Athens Factory Staff Shooter

08-20-2010, 05:42 PM	#5 (permalink)
Pureluck 100gr Join Date: Apr 2010 Location: Ohio Posts: 156	I have noticed that Swhackers penetrate fairly close to my Hellrazors at 40 yards. The Grim Reaper 1 3/8 inch cut would be the most extreme I would say with your setup. Idealy I would stick with a fixed blade as well. PL __________________ McPherson Monster 63lbs 28in 297fps PileDriver Hunter 350

08-20-2010, 10:32 PM	#6 (permalink)
richa3md 130gr Join Date: Mar 2010 Location: Mid Michigan Posts: 546	Even rage has a 40 KE version but I personally in good conscience would shoot at a deer with a mech if not properly equipped just my 2cents __________________ 09' PSE Super Short 29 in and 72.5# and 125 gr G5 Striker Magnum!!!

08-20-2010, 02:15 PM	#2 (permalink)
prestoncohunter Trial Member Join Date: Aug 2010 Location: West Virginia Posts: 4	I guess I should also add, these will be used mostly for whitetails but we do have several black bear around and if one comes by I plan on taking it as well. I also hunt about 25% of the time from a popup blind and would prefer to keep the shoot thru screens in place.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode