My experience with Rage broadheads -

lungbuster123 · 03-23-2011, 01:19 PM

Ok yall I used Rage broadheads for the last two season's and NEVER had the first problem. I got pass throughs on everything except for the ram, but the only thing left inside him was the fletchings. Ive put them through bone with no problems.

There is no such thing as flight problems with these heads...they fly like fieldtips out to 60 yards (as far as I shoot) as do most mechanical heads. Ive shoot them out of un-tuned bows to see if it made a difference and no difference in flight with that bow either.

First the Ram....he was standing broadside at 30 yards and the shot was right in the heart...Rage 2 blade broke both shoulders and like I said the only thing left inside was the fletchings he went maybe 5 yards and was dead in under 10 seconds.

The small buck was standing at 30 yards quartering very slightly away shot took out both lungs and he went maybe 40 yards with an awsome bloodtrail.

The coyote was also at 30 yards and my first shot was with a Rage 2 blade which hit her spine and dropped her completly my fault I rushed the shot, but made a very quick follow up shot. The shot pictured was a follow up with the Rage 3 blade a buddy sent me to try. From the time this arrow entered and exited the coyote she was dead in under 10 seconds.

Plan and simple they work! All of the arrows used were around the 400 grain mark some alittle heavier...three different arrows out of three different bows and the same result's everytime VERY QUICK KILL'S and SHORT BLOODTRAIL's.

Dr.Redneck · 03-23-2011, 03:27 PM

I would use them if they idnt clean out your wallet ! Ill stick with the 2 blade stinger for now.

lungbuster123 · 03-23-2011, 03:40 PM

I dont go cheap on anything else on my setup why would I on my broadhead

Dr.Redneck · 03-23-2011, 07:35 PM

Well, they're a little pricy for a 13 year olds budget if you know what I mean.

dpoutdoor · 03-24-2011, 10:31 AM

Rage 2 blade are the best ive found! they are pricey, but they all pretty much are

turkeykillingfo · 03-24-2011, 05:39 PM

It will take a lot of convinceing for me to use them again..I have had and seen to many deer shot with them and not get good results...They are not made well at all..To weak..

lungbuster123 · 03-24-2011, 07:52 PM

Guys this is not a thread for bashing Rage. Like it says the thread title it is MY EXPERIENCE with them. Quartering to, quartering away, broadside ive seen them work 100% everytime. My buddy that sent me the three blade to try out has killed 11 deer with the two blade and 42 deer with the three blade worked everytime. Shooting them from a properly tuned bow, and making well placed shot's they do what they are supposed to do (somtimes on not so great shot's)

I have never seen one of these head's break either....slightly bent blade is the worst ive seen from hitting a rock after passing through.

Dr.Redneck · 03-24-2011, 08:00 PM

Quote:

Originally Posted by lungbuster123

Guys this is not a thread for bashing Rage. Like it says the thread title it is MY EXPERIENCE with them. Quartering to, quartering away, broadside ive seen them work 100% everytime. My buddy that sent me the three blade to try out has killed 11 deer with the two blade and 42 deer with the three blade worked everytime. Shooting them from a properly tuned bow, and making well placed shot's they do what they are supposed to do (somtimes on not so great shot's)

I have never seen one of these head's break either....slightly bent blade is the worst ive seen from hitting a rock after passing through.

I would use them if I could afford them, I like their design and I think they're the best mechanical out there by far. Have you heard of any websites that sell them cheaper than usual ?

lungbuster123 · 03-24-2011, 08:08 PM

Quote:

Originally Posted by Dr.Redneck

I would use them if I could afford them, I like their design and I think they're the best mechanical out there by far. Have you heard of any websites that sell them cheaper than usual ?

Nope got to pay to play. You might be able to find some alittle cheaper here or on AT. Ive seen them over there for around $30 every once in awhile. Depending on your specs I would use the 40 KE if your going to try them out.

turkeykillingfo · 03-25-2011, 01:40 PM

Ok..I thought this was a thread to post experiences with rage heads if the people on here use them now or have used them in the past..

Pureluck · 03-28-2011, 05:52 AM

Quote:

Originally Posted by Dr.Redneck

I would use them if I could afford them, I like their design and I think they're the best mechanical out there by far. Have you heard of any websites that sell them cheaper than usual ?

If you want to try them out get the Gators from Basspro. They are the same broadhead but Gators dont consist of the o-ring you gotta worry about on the rage and the fact that rage almost always opens in your quiver. Also the Gators are cheaper.

elkhunter505 · 03-30-2011, 07:23 AM

If you want cheap rages google rage broadheads then find them in shopping and go to Amazon they are 33 a pack.

Buffalo · 05-03-2011, 07:34 PM

Quote:

Originally Posted by turkeykillingfo

It will take a lot of convinceing for me to use them again..I have had and seen to many deer shot with them and not get good results...They are not made well at all..To weak..

Too weak???? I have shot 6 mature Kansas and Iowa bucks (330-270lbs) and all passthroughs and could have reused every head.

cartman308 · 05-04-2011, 06:20 AM

No personal attacks please.

03-23-2011, 03:27 PM	#2 (permalink)
Dr.Redneck 100gr Join Date: Nov 2010 Location: Kansas Posts: 158	I would use them if they idnt clean out your wallet ! Ill stick with the 2 blade stinger for now. __________________ It sounded like a good idea at the time....

03-23-2011, 07:35 PM	#4 (permalink)
Dr.Redneck 100gr Join Date: Nov 2010 Location: Kansas Posts: 158	Well, they're a little pricy for a 13 year olds budget if you know what I mean. __________________ It sounded like a good idea at the time....

03-24-2011, 10:31 AM	#5 (permalink)
dpoutdoor Trial Member Join Date: Dec 2009 Location: Rougemont, NC Posts: 12	Rage 2 blade are the best ive found! they are pricey, but they all pretty much are __________________ Athens Archery Staff Shooter,Roost'em Calls ProStaff, U-Slide ProStaff

03-30-2011, 07:23 AM	#12 (permalink)
elkhunter505 75gr Join Date: Jan 2011 Posts: 27	If you want cheap rages google rage broadheads then find them in shopping and go to Amazon they are 33 a pack. __________________ Bowtech Captain 25 1/2inches 67lbs/ Carbon Express Arrows/ Grim Reaper Razor Tips

05-04-2011, 06:20 AM	#14 (permalink)
cartman308 Broadhead Mod Join Date: Nov 2009 Location: Fraziers Bottom, WV Posts: 1,226	No personal attacks please. __________________ Broadheadtalk Moderator Athens Factory Staff Shooter

03-23-2011, 03:40 PM	#3 (permalink)
lungbuster123 100gr Join Date: Oct 2010 Posts: 153	I dont go cheap on anything else on my setup why would I on my broadhead

03-24-2011, 05:39 PM	#6 (permalink)
turkeykillingfo 85gr Join Date: Oct 2010 Location: Kentucky Posts: 65	It will take a lot of convinceing for me to use them again..I have had and seen to many deer shot with them and not get good results...They are not made well at all..To weak..

03-24-2011, 07:52 PM	#7 (permalink)
lungbuster123 100gr Join Date: Oct 2010 Posts: 153	Guys this is not a thread for bashing Rage. Like it says the thread title it is MY EXPERIENCE with them. Quartering to, quartering away, broadside ive seen them work 100% everytime. My buddy that sent me the three blade to try out has killed 11 deer with the two blade and 42 deer with the three blade worked everytime. Shooting them from a properly tuned bow, and making well placed shot's they do what they are supposed to do (somtimes on not so great shot's) I have never seen one of these head's break either....slightly bent blade is the worst ive seen from hitting a rock after passing through.

03-25-2011, 01:40 PM	#10 (permalink)
turkeykillingfo 85gr Join Date: Oct 2010 Location: Kentucky Posts: 65	Ok..I thought this was a thread to post experiences with rage heads if the people on here use them now or have used them in the past..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode