expandable for me! -

stampy · 07-14-2011, 10:47 PM

hey guys and gals, i am shooting a 325 ibo bow with a 27" draw at 60 lbs, arrow weight is 356 and where i hunt 60 yard shots are fairly common, wich expandable broadhead do you think would provide pass through penetration for me, given proper placement ofcourse. mainly hunting whitetails. thanks in adavance

stampy · 07-14-2011, 10:54 PM

arrow speeds in the 265 ish range, thanks a bunch

SV MAD · 07-14-2011, 11:24 PM

I would go with G5T3.

stampy · 07-23-2011, 01:02 AM

i opologize for being away , workin sucks but, i am a little surprised at that answer, t3's seem like they would require a little more k.e , 1.5 " at 50 yds for my setup ??? you think so, i am not being sarcastic., that sounds great!! thanks a bunch, any one else have any suggestions?

05_sprcrw · 07-23-2011, 07:18 AM

if it were me i would go with the smallest cut i could get from a mech. Grim reapers have a 1 3/8" cut head I am not sure if there is a smaller cut or not.

ruck139 · 07-23-2011, 07:20 AM

Rage 40ke

lungbuster · 07-23-2011, 12:32 PM

+2 on 1 3/8 grim reaper if you decide to go that route.may i ask why you want a mechanical.I have the same dl and dw but wouldnt consider a mechanical

I shoot st mags and get outstanding performance.the reason i ask is most of the time people choose mech because they dont understand bh tuning.its simple and you can get the same accuracy as mech with better penetration

07-14-2011, 10:47 PM	#1 (permalink)
stampy Trial Member Join Date: Jun 2011 Posts: 10	expandable for me! hey guys and gals, i am shooting a 325 ibo bow with a 27" draw at 60 lbs, arrow weight is 356 and where i hunt 60 yard shots are fairly common, wich expandable broadhead do you think would provide pass through penetration for me, given proper placement ofcourse. mainly hunting whitetails. thanks in adavance

07-14-2011, 11:24 PM	#3 (permalink)
SV MAD 85gr Join Date: Jun 2010 Location: Johannesburg, South Africa Posts: 34	I would go with G5T3. __________________ Hoyt Maxxis 35 90#, 31' GT Kinetic, 200 spine, 552gr, SlickTrick magnum 100gr, 315fps G5 T3 100gr, KE=129!!

07-23-2011, 07:18 AM	#5 (permalink)
05_sprcrw Broadhead Tester Join Date: Mar 2010 Location: Lincoln, NE Posts: 1,445	if it were me i would go with the smallest cut i could get from a mech. Grim reapers have a 1 3/8" cut head I am not sure if there is a smaller cut or not. __________________ New Breed Archery Samurai Genetix 82lbs 29" 550 Grains 16% F.O.C. 282 fps, RFA Phoenix and Razorhawk Broadheads

07-23-2011, 12:32 PM	#7 (permalink)
lungbuster 85gr Join Date: Jun 2010 Location: deleware county ny Posts: 55	+2 on 1 3/8 grim reaper if you decide to go that route.may i ask why you want a mechanical.I have the same dl and dw but wouldnt consider a mechanicalI shoot st mags and get outstanding performance.the reason i ask is most of the time people choose mech because they dont understand bh tuning.its simple and you can get the same accuracy as mech with better penetration

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2011, 10:54 PM	#2 (permalink)
stampy Trial Member Join Date: Jun 2011 Posts: 10	arrow speeds in the 265 ish range, thanks a bunch

07-23-2011, 01:02 AM	#4 (permalink)
stampy Trial Member Join Date: Jun 2011 Posts: 10	i opologize for being away , workin sucks but, i am a little surprised at that answer, t3's seem like they would require a little more k.e , 1.5 " at 50 yds for my setup ??? you think so, i am not being sarcastic., that sounds great!! thanks a bunch, any one else have any suggestions?

07-23-2011, 07:20 AM	#6 (permalink)
ruck139 Trial Member Join Date: Jul 2011 Posts: 5	Rage 40ke