Sabretooth Broadhead.. -

richa3md · 03-06-2010, 11:14 PM

How would they compare to magnus buzzcuts. Does that coating really help penetration? Any input of how effective these broadheads are at bringing down animals. Pics or reviews would be great. Thanks.

Whitetail assain · 03-06-2010, 11:22 PM

Well I have killed 20 plus deer with the buzz cuts never had an issue with finding them.

richa3md · 03-06-2010, 11:34 PM

Well I am just wondering if the "special coating is really what its cracked up to be, and how well it would handle going through bone.

MT_Bowhunter · 06-06-2010, 02:01 PM

I just got the 140 gr glue ons, where 2 of them have threaded 75 gr addaptors which gives me a total of 215 gr up front for my Easton 2020's. I know from practicing with the two threaded ones, these are dead nuts accurate.

I just don't have a 4 legged vegitarian to try them out on right now.

Speaking of the threaded addaptors, will any 75 gr threaded addaptor glue into these?

ike_osu · 06-11-2010, 11:28 PM

I used the Sabertooths before switching to the Phat Head and I still use them on the recurve. I have not however used the buzzcuts so I can not compare. I had great luck with the Sabers with my short draw and low poundage. I got plenty of pass through and if I did my job on the shot the blood trails were great. Bone didn't seem to be a problem for these heads. I still have one that I believe is a 125 grain screw on email me your address and I'll mail it to you to try. ikesoutdoors@yahoo.com

Whitetail assain · 06-12-2010, 08:15 AM

Well I have ran the buzz cuts through 3/4 inch plywood a couple times same head never any issues.

I have shot many deer in the shoulder, one or two in the spine never any issues just sharpen them up spin test any ready for kill in duty again. My personal thoughts if I was going on a dangerous hunt of some sort it would be either Buzz cuts or slick trick mags for me.

richa3md · 07-14-2010, 11:57 PM

sweet will do Ike

T-MAC · 07-29-2010, 08:47 PM

I used the sabertooths last year and it put the hurt on a nice 11 point. I burried the arrow to the fletch at 8 yards with my longbow and the buck went about 65 yards before crashing. I'm trying the pheonix from RFA this year but I have them as backups.

richa3md · 07-30-2010, 08:46 PM

So thanks to ike I have one to test. WOW penetration city and the wound channel is pretty awesome to.

03-06-2010, 11:14 PM	#1 (permalink)
richa3md 130gr Join Date: Mar 2010 Location: Mid Michigan Posts: 546	Sabretooth Broadhead.. How would they compare to magnus buzzcuts. Does that coating really help penetration? Any input of how effective these broadheads are at bringing down animals. Pics or reviews would be great. Thanks.

03-06-2010, 11:22 PM	#2 (permalink)
Whitetail assain 100gr Join Date: Jan 2010 Location: Mid Michigan Posts: 290	sabretooth broadheads Well I have killed 20 plus deer with the buzz cuts never had an issue with finding them.

06-06-2010, 02:01 PM	#4 (permalink)
MT_Bowhunter 100gr Join Date: Apr 2010 Location: Kalispell, MT Posts: 127	I just got the 140 gr glue ons, where 2 of them have threaded 75 gr addaptors which gives me a total of 215 gr up front for my Easton 2020's. I know from practicing with the two threaded ones, these are dead nuts accurate. I just don't have a 4 legged vegitarian to try them out on right now. Speaking of the threaded addaptors, will any 75 gr threaded addaptor glue into these? __________________ "I don't bowhunt for a living... But I live to bowhunt the traditional way"

06-11-2010, 11:28 PM	#5 (permalink)
ike_osu Broadhead Tester Join Date: Nov 2009 Location: MO Posts: 330	I used the Sabertooths before switching to the Phat Head and I still use them on the recurve. I have not however used the buzzcuts so I can not compare. I had great luck with the Sabers with my short draw and low poundage. I got plenty of pass through and if I did my job on the shot the blood trails were great. Bone didn't seem to be a problem for these heads. I still have one that I believe is a 125 grain screw on email me your address and I'll mail it to you to try. ikesoutdoors@yahoo.com __________________ http://www.ikesoutdoors.comArticles, Product reviews, How-to videos and more www.jakefeather.com Video Production, DVD Duplication, Website Design

06-12-2010, 08:15 AM	#6 (permalink)
Whitetail assain 100gr Join Date: Jan 2010 Location: Mid Michigan Posts: 290	Sabretooth broadhead Well I have ran the buzz cuts through 3/4 inch plywood a couple times same head never any issues. I have shot many deer in the shoulder, one or two in the spine never any issues just sharpen them up spin test any ready for kill in duty again. My personal thoughts if I was going on a dangerous hunt of some sort it would be either Buzz cuts or slick trick mags for me.

03-06-2010, 11:34 PM	#3 (permalink)
richa3md 130gr Join Date: Mar 2010 Location: Mid Michigan Posts: 546	Well I am just wondering if the "special coating is really what its cracked up to be, and how well it would handle going through bone.

07-14-2010, 11:57 PM	#7 (permalink)
richa3md 130gr Join Date: Mar 2010 Location: Mid Michigan Posts: 546	sweet will do Ike

07-29-2010, 08:47 PM	#8 (permalink)
T-MAC 85gr Join Date: Jul 2010 Location: Northeast Oklahoma Posts: 43	I used the sabertooths last year and it put the hurt on a nice 11 point. I burried the arrow to the fletch at 8 yards with my longbow and the buck went about 65 yards before crashing. I'm trying the pheonix from RFA this year but I have them as backups.

07-30-2010, 08:46 PM	#9 (permalink)
richa3md 130gr Join Date: Mar 2010 Location: Mid Michigan Posts: 546	So thanks to ike I have one to test. WOW penetration city and the wound channel is pretty awesome to.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode